i113Max-105W产品规格书

客 户

CUSTOMER：

产品名称：多口智能充电器

DESCRIPTION：

产品型号：i116-105W

PRODUCT MODEL：

日 期：2024-11-28

DATE：

客户确认签章 APPROVED SIGNATURE
DATE:	DATE:	DATE:

客户确认签字,盖章后请返回承认书一份

PLEASE RETURN TO US ONE COPY OF “SPECIFICATION FOR

APPROVAL”WITH YOUR APPROVED SIGNATURE

一.产品特性描述

产品参数说明Product parameter description：

Model: i116

Input: AC 110-245V, 50/60Hz, 2.5A max

Output-USBC1 : 20W max

Output-USBA1 : 18W max

Output-USBC2 : 65W max

Output-USBC3 : 65W max

Output-USBC3+USBC2 :45W+20W max

Output-USBC3+USBA1:45W+18W max

Output-USBC3+（USBC2+USBA1） :45W+（5V3A） max

Output-USBC3+（USBC2+USBA1）+USBC1 :45W+（5V3A）+20W max

Output-USBC3+（USBC2+USBA1）+USBC3 +手机无线充电（Mobile phone wireless charging）15W+耳机无线充电（Wireless charging of headphones）5W max

Output: 18W:5V3A,9V2A,12V1.5A max

Output: 20W:5V3A,9V2A,12V1.67A max

Output: 45W:5V3A,9V3A,12V3A,15V3A,20V2.25A max

Output: 65W:5V3A,9V3A,12V3A,15V3A,20V3.25A max

Output: PPS:5V-11V 2A,5V-21V3A max

该产品USBC1为独立20W快充，USBC2+USBC3+USBA1为65W智能功率升降调节，以及手机无线充电15W，耳机无线充电5W独立固定输出。适合于所有USB充电的使用，同时协议支持市面开放式的协议快速充电，如笔记本电脑，平板电脑，三星，苹果，华为，MP4，GPS，数码相机等，操作简便。

The product USBC 1 is an independent 20W fast charge, USBC 2 + USBC 3 + USBA 1 is 65W intelligent power lifting adjustment, and mobile phone wireless charging 15W, headset wireless charging 5W independent fixed output. Suitable for the use of all USB charging, while the protocol supports the market open protocol fast charging, such as laptop, tablet, Samsung, Apple, Huawei, MP4, GPS, digital camera, etc., easy to operate.

同时该产品在充电窗口设计了外框氛围灯光，以触摸式操作。触摸3秒放开，打开灯光，再触摸3秒放开，关闭灯光，短触摸为切换灯效。

At the same time, the product is designed with the outer frame atmosphere light in the charging window to touch the operation. Touch 3 seconds to open, turn on the light, touch again 3 seconds to open, turn off the light, short touch to switch the light effect

灯效分为四种，1.蓝灯常亮，2.流光益彩灯效，3.流光呼吸灯效，4.流光跑马灯效。

The lamp effect is divided into four kinds, 1. The blue light is always on, 2. streamer light lamp effect, 3. Streamer breathing lamp effect, 4. Streamer horse racing lamp effect.

产品规格标准Product specification standard：

1. 输入特性input characteristics ：

2.1输入电压(Input Voltage):

额定电压(Nominal Voltage):110-245Vac

调整范围（Variation Range）:100-264Vac

2.2输入频率（Input Frequency）:

额定频率（Nominal Frequency）:50/60Hz

调整频率（Variation Frequency）:47-63Hz

2.3输入电流(Input Current):

当输入交流电压为额定值的下限时,输出电压负载满载，最大输入交流电流3A。

When the input AC voltage is the lower limit of the rated value, the output voltage load is full, and the maximum input AC current is 3A.

2.4浪涌电流(Inrush Current):

当输出为额定负载，环境温度为25℃，输入240Vac冷态起动电源时的最大浪涌电流小于30A。

30Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient.

2.5 AC漏电流(Ac 电流特性5V output voltage and current characteristics：

电压 Leakage Current):

当输入电压240Vac时，最大漏电流为0.25mA。

1. 25mA Max At 240Vac input.

2. 输出电压电流纹波特性Output voltage and current ripple characteristics of ports A and C

2.1 5V电压电流特性

输出电压 最小负载 最大负载 峰值电流 输出功率

Voltage Min. Load Max. Load Peak Output Power

+5Vdc 0A 3A 3.1A 15W

负载特性/调整率(Combined Load/Line Regulation):

电压 最小负载电压 最大空载电压 线性调整 负载调整

Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation

+4.95Vdc 4.75V 5.25V ±5% ±5%

2.2 9V电压电流特性

输出电压 最小负载 最大负载 峰值电流 输出功率

Voltage Min. Load Max. Load Peak Output Power

+9Vdc 0A 2A 2.2A 18W

负载特性/调整率(Combined Load/Line Regulation):

电压 最小负载电压 最大空载电压 线性调整 负载调整

Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation

+8.95Vdc 8.75V 9.25V ±5% ±5%

2.3 12V电压电流特性

输出电压 最小负载 最大负载 峰值电流 输出功率

Voltage Min. Load Max. Load Peak Output Power

+12Vdc 0A 1.5A 1.7A 18W

负载特性/调整率(Combined Load/Line Regulation):

电压 最小负载电压 最大空载电压 线性调整 负载调整

Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation

+11.95Vdc 11.75V 12.25V ±5% ±5%

2.4 15V电压电流特性

输出电压 最小负载 最大负载 峰值电流 输出功率

Voltage Min. Load Max. Load Peak Output Power

+15Vdc 0A 3A 3.2A 45W

负载特性/调整率(Combined Load/Line Regulation):

电压 最小负载电压 最大空载电压 线性调整 负载调整

Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation

+14.95Vdc 14.75V 15.25V ±5% ±5%

2.5 20V电压电流特性

输出电压 最小负载 最大负载 峰值电流 输出功率

Voltage Min. Load Max. Load Peak Output Power

+20Vdc 0A 2A 2.2A 18W

负载特性/调整率(Combined Load/Line Regulation):

电压 最小负载电压 最大空载电压 线性调整 负载调整

Voltage Min. Voltage Max. Voltage Line Regulation Load Regulation

+19.95Vdc 19.75V 20.25V ±5% ±5%

12.25V ±5% ±5%

2.6 波纹和噪音（Ripple And Noise）:

测试条件：任何负载正常工作下，使用示波器带宽为100MHz连接到充电器的输出端，同时输出端并连一个47uF的电解电容和一个0.1uF的瓷片电容。

The ripple and noise are as follows when measure with Max. Bandwidth of 100MHz and Parallel 47uF/0.1uF,crossed connected at testing point.

电压 最大波纹最大噪音

Voltage Ripple And Noise(Max.)

+5Vdc 150mVp-p

4．过流保护Overpower protection：

当充电口电流上升至额定时，自动进入过流保护模式，故障排除后能恢复正常工作。

When the current of the charging port rises to the rated level, it will automatically enter the overcurrent protection mode and can resume normal operation after troubleshooting

5．过压保护overvoltage crowbar：

当输出电压超过额定电压时,电源将保护,故障排除后能恢复正常工作。

When the output voltage exceeds the rated voltage, the power supply will be protected and can resume normal operation after troubleshooting.

6．短路保护short-circuit protection：

当充电口外接设备发生短路时，自动进入短路保护模式，故障排除后能恢复正常工作。

When the external device of the charging port has a short circuit, it will automatically enter the short circuit protection mode and can resume normal operation after troubleshooting.

7．浪涌电流(Inrush Current):

当输出为额定负载，环境温度为25℃，输入240Vac冷态起动电源时的最大浪涌电流小于30A。

When the output is rated load, the ambient temperature is 25 ℃, the maximum surge current is less than 30A when the input 240Vac cold starting power supply.

8．启动延迟时间(Turn On Delay Time):

当输入115Vac和输出最大负载时,最大启动时间为2S。

When input 115Vac and output maximum load, the maximum startup time is 2S.

9．上升时间(Rise Time):

当输入115Vac和输出最大负载时最大时间为40mS。

The maximum time is 40 mSwhen input 115 Vac and output maximum load.

10．转换效率transfer efficiency：

当输入100Vac和输出最大负载时,最小86%。

When you enter 100 Vac and output the maximum load, the minimum is 86.

当输入240Vac和输出最大负载时，最小90%。

When input 240 Vac and output maximum load, minimum 90.

11．过冲(Overshoot):

在电源开启或关闭的时候,最大15%。

When the power is turned on or off, the maximum is 15.

12、环境要求Environmental requirements:

12-1工作温度[电] working temperature:

0℃~ -75℃,满载,正常工作。

0 ℃ ~ -75 ℃, full load, working normally.

12.2储存温度:-20℃to65℃,带外壳.

Storage temperature:-20 ℃, to65 ℃, with shell.

12.3工作湿度:Working humidity:

5%(0℃)～90%(40℃),72小时,满载,正常工作。

5% (0 ℃) 90% (40 ℃) for 72 hours, full load, normal working.

13．振动(Vibration):

1、测试标准:国际电工电子委员会 Operating: IEC 721-3-3 3M3

5～9Hz,A=1.5mm 加速度（9～200Hz,Acceleration 5m/s²） 2、运输（Transportation）： IEC 721-3-2 2M2

5-9Hz，A=3.5mm

9～200Hz,加速度Acceleration=5m/S²

200～500HZ,加速度Acceleration=15m/S²

3、轴向振动（Axes,10 cycles per axis）.

在测试过程中不能出现永久性的损坏。

No permanent damage may occur during testing.

在电源开启和关闭后，样机能够恢复到最初条件。

The product has to restors its original situation after power off/on.)

4．跌落试验(Dropping)(Packed):

一个角,三个棱, 六个面。

1 corner,3 edges, and 6 surfaces

高度76m Height:76cm

14．安全及要求(SAFETY AND EMC REQUIREMENT):

1安全:符合 CE 标准

2高压(DIELECTRIC STRENGTH)(H-Pot)：

()Primary to secondary),3200Vac/5mA/3s.